If you really want to make your sled stand out, add on a set of Nasty Nuts. These will fit any wheel (plastic or other Billet Wheels) that use either a 6205 or 6004 bearing (see note below on this). They come with a threaded stud that will replace your existing idler wheel bolt , and the Nasty Nut will be the nut that holds on your idler wheel, ensuring that they will not come off like stock wheel caps.
If you are also purchasing wheels we are offering a discount on the Nasty Nuts.
Note: You will need a 1.5 inch wrench or socket to install these, or a set of our Nasty Nut wrenches which can be purchased below.
Sizes:
It is very hard for us to know what bolts are in every sled out there, we have listed the 2 common sizes for front and rear wheels, to verify what is in your machine you will have to take your existing bolts out. The length can be measured easily at home, but for the thickness & thread type you may have to take them to your local hardware store and match it up there. If your size is not listed, please select 'OTHER' and give us the details in your order.
Rear Wheels:
M10 x 20 mm (3/4 inch) coarse thread
3/8 x 3/4 inch coarse thread (16 pitch)
Front Wheels:
M8 x 100 mm (3 3/4 inch) coarse thread
5/16 x 3 3/4 inch coarse thread (18 pitch)
What they will fit:
These will fit over any wheel (all billets & stock) that uses a 6205 or 6004 bearing. Before ordering please inspect your wheel, if you bearing is flush to the front of the wheel (not sunk in) then you have no problem. If the front edge of your bearing is set back further into the wheel, then you have to measure how far in they are set and give those measurements to us, and we will make the nut deeper so it will touch your bearing
XP/XR/XM/XS/G4 Owner's: Due to the fact that BRP uses really thin M6 bolts for there front wheels we will be using M8 bolts for our nasty nuts. You will need to take a drill and make the holes in your rails slightly larger so the nasty nuts will fit.
All prices shown are in Canadian dollars
Pointy Nasty Nuts
Pointy Nasty Nuts
Curved Nasty Nuts
Curved Nasty Nuts
Curves Rear
Description: a curved style nut that fits either a 6205 or 6004 bearing
Price: $15 each ($13 with wheel purchase)
out of stock
Curved Front
Description: a curved style nut that fits either a 6205 or 6004 bearing
Price: $15 each ($13 with wheel purchase)
out of stock
Please share your pictures and follow us on Facebook and Instagram.....@trickedtoys
Snowbike Big Wheel Kits
Mototrax Snowbike kits
Billet Brake Fluid Tanks
Rattle Stopper
Quick Connect Hitch
Bite Harder Carbide Sharpener
Ski-Z ice scratchers
Nasty Nut Wrenches
Polaris Rush pull cord handles now available
Oil Tank Inserts now available
Check out our new 'Bullet' wheel design in our picture section
Snow Flap Savers
XP/XR Splash Guards to prevent belt slippage
Billet Brake Levers, reservoir caps, spring adjuster blocks and Yamaha gas caps
Risers now available
11 inch wheels now available , see products section for more info
10 inch re-location axles now available , see products section for more info
we now carry all C&A skis, see products section for more info
billet gas caps are now available , see products section for more info
Mountain sled drop brackets, check out the products section for more info
REV XP Pull Cord Handles now available, check out the products section for more info
10 inch wheels now available, check out the products section for more info
7.8 inch wheels now available for REV XP Longtrack, check out the products section for more info
Check out our clearance section for some great deals