Billet Handle Bar Risers
All Prices are in Canadian Dollars
Smitty Billet Handle Bar Risers
The Smitty billet aluminum bar riser's are a great addition to any sled. These can be ordered in 6,7,8,9, and 10 inch lengths, and are made to work with 7/8 sized bars. Fatboy riser's can be custom ordered if required (7/8 lower bar, 1 - 1/8 upper). Custom engraving can also be requested, but expect longer delivery for custom orders. They come standard in a polished finish, and red, black, and blue anodizing is available at a $20 surcharge.
 |
 |
 |
 |
6" Smitty Bar Riser Made 6061 aluminum, kit comes complete with hardware and installation instructions in a polished billet aluminum finish. These are made to work with 7/8 bar. Price: $69.95 Cdn (Picture shows anodized blue) |
|
|
7" Smitty Bar Riser Made 6061 aluminum, kit comes complete with hardware and installation instructions in a polished billet aluminum finish. These are made to work with 7/8 bar. Price: $79.95 Cdn (Picture shows anodized blue) |
|
|
8" Smitty Bar Riser Made 6061 aluminum, kit comes complete with hardware and installation instructions in a polished billet aluminum finish. These are made to work with 7/8 bar. Price: $89.95 Cdn (Picture shows anodized blue) |
|
|
9" Smitty Bar Riser Made 6061 aluminum, kit comes complete with hardware and installation instructions in a polished billet aluminum finish. These are made to work with 7/8 bar. Price: $99.95 Cdn (Picture shows anodized blue) |
|
|
10" Smitty Bar Riser Made 6061 aluminum, kit comes complete with hardware and installation instructions in a polished billet aluminum finish. These are made to work with 7/8 bar. Price: $109.95 Cdn (Picture shows anodized blue) |
|
 |
Anodizing: Add color to your bar riser's, choose from one of the following anodizing colors: Red, Blue, Black Price: $25.00 Cdn |
Additional Bar Riser's
 |
2 " Adjustable Riser Blocks Made of extruded 6061-T6 aluminu, kit comes complete with hardware and installation instructions and in a high quality black anodized finish. Price: $39.95 Cdn |
|
|
4" Adjustable Riser Blocks Made of extruded 6061-T6 aluminu, kit comes complete with hardware and installation instructions and in a high quality black anodized finish. Price: $45.95 Cdn |
|
|
6" Adjustable Riser Blocks Made of extruded 6061-T6 aluminu, kit comes complete with hardware and installation instructions and in a high quality black anodized finish. Price: $49.95 Cdn |
|
|
8" Adjustable Riser Blocks Made of extruded 6061-T6 aluminu, kit comes complete with hardware and installation instructions and in a high quality black anodized finish. Price: $58.95 Cdn |
|
 |
Universal Pivot Riser Sytem Universal Pivot Adaptor works on all brands of snowmobiles with a flat steering post. It raises bars 3 inches and can be used without additional riser blocks. Dual pivot points allow for bars to be positioned front to back and rotated up or down. Use additional riser blocks to increase bar height an additional 3, 6, or 9 inches. -Universal 3" Pivot Adaptor/Riser $74.95 Cdn |
Universal 3" Pivot Adaptor/Riser Universal Riser Block 3 inch Universal Riser Block 6 inch Universal Riser Block 9 inch |
 |